Deploying Operating systems with MDT, SCCM, Orchestrator and SCSM – part 3

I intend this to be a series of blog posts about my experience in implementing end to end OSD solution. I will be writing about my lab implementation, as production version has much unneeded clutter that would just confuse the whole blog post.

I thought this blog series would be split in following posts:

  1. Intro
  2. Lab setup
  3. MDT
  4. SCCM
  5. Intel AMT
  6. Orchestrator
  7. SCSM
  8. Bringing it all together
  9. Recap

I finally got around to writing the next part of this blog series. It has been long overdue, but circumstances did not allow me to get to it. I plan on doing it now in a swift fashion.

I have managed to finish this setup in my dev environment, but for some reason, I cannot put it into production, even though it is all ready to deploy, god understand managers if he can… Now with my chest cleared, let’s get cracking 🙂

Microsoft Deployment Toolkit, MDT, is a free collection of scripts that allow for Lite Touch Installation (LTI) deployment of Windows. It actually supports ZTI, LTI and UDI, but it is regarded as a LTI solution. Only when connected to SCCM it becomes true ZTI. There is a great explanation of this in a book written by Johan Arwidmark, Stealing with Pride. It is a great resource on MDT and deployment.

So we are going to leverage MDT for its database, monitoring, logging and we will create MDT task sequences in SCCM. We will also import DaRT in MDT and boot image, so we can connect to deploying computer and actually see the screen while Windows is deploying.

Installing MDT is straight forward, as well as using deployment database. There are many great guides on internet, but for starters basic next, next, finish should be enough, even though I prefer PowerShell scripted solutions 🙂 Once it is installed, you need to create a new deployment share and new database, it is just a matter of right clicking deplyoment share and database node and you should be on your way.

Since we will leverage SCCM for deployment we do not need to create a task sequence in MDT, or install images, but we do want to create a boot image, so we can manage monitoring later on.

To enable monitoring you have to go to deployment share and under monitoring tab enable monitoring. be aware though that monitoring has it own logging as well. By default it is set to information level, and default path is C:\temp !! So if you have this folder on your C: drive, it will start saving logs to your temp folder and it will fill your disk and break your computer 🙂 So to prevent this from happening, we want to change log level and change log file location. Johan has a great post about it here.

image

So now we have monitoring and log files for it are under control. We just need to enable DaRT in our boot images, so we can actually connect to computer and see what is going on on the screen. First you need to get DaRT, it is part of MDOP. After you download DaRT you have to install it. Then

  1. Copy the Tools.cab file from the DaRT installation to the appropriate tools folder (either Tool\x86 or Tools\x64) in a deployment share.
  2. In the Deployment Workbench console tree, go to Deployment Workbench/Deployment Shares
  3. In the details pane, click deployment_share (where deployment_share is the name of the deployment share for which you want to enable DaRT support).
  4. In the Actions pane, click Properties.
    The deployment_share Properties dialog box appears (where deployment_share is the name of the deployment share for which you want to enable DaRT support).
  5. In the deployment_share Properties dialog box, on the Windows PE tab, select platform (where deployment_share is the name of the deployment share for which you want to enable DaRT support and platform is the processor architecture platform for which you want to enable DaRT support), select the Microsoft Diagnostics and Recovery Toolkit (DaRT) check box, and then click OK.
  6. Update the deployment share.

That is it. now you have a WinPE, boot image, with DaRT integrated. you can also see an extra button if you click on a computer under Monitoring node in MDT Workbench.

image

Here are some resources I found while exploring MDT and DaRT. Hope you find them helpful.

Deploy DaRT with the Microsoft Deployment Toolkit:

https://technet.microsoft.com/en-us/windows/hh475799.aspx?f=255&MSPPError=-2147217396

Integrating DaRT (8.x) with MDT (2013) and enable DaRT Remote Control:

http://www.vkernel.ro/blog/integrating-dart-8-x-with-mdt-2013-and-enable-dart-remote-control

Adding DaRT 8.1 from MDOP 2013 R2 to ConfigMgr 2012 R2:

http://deploymentresearch.com/Research/Post/334/Adding-DaRT-8-1-from-MDOP-2013-R2-to-ConfigMgr-2012-R2

Advertisements

5 thoughts on “Deploying Operating systems with MDT, SCCM, Orchestrator and SCSM – part 3

  1. Pingback: Deploying Operating systems with MDT, SCCM, Orchestrator and SCSM – part 2 | SCCM and more

  2. Pingback: Deploying Operating systems with MDT, SCCM, Orchestrator and SCSM – part 4 | SCCM and more

  3. Pingback: Deploying Operating systems with MDT, SCCM, Orchestrator and SCSM – part 1 | SCCM and more

  4. Pingback: Deploying Operating systems with MDT, SCCM, Orchestrator and SCSM – part 6 | SCCM and more

  5. Pingback: Deploying Operating systems with MDT, SCCM, Orchestrator and SCSM – part 7 | SCCM and more

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s